• ico clock Open 7 days
  • ico clock 5 star service
  • ico clock Same day plumbing service
  • ico clock Open now
Phone icon Look no further. Call us now! 1300 13 80 80

LOCAL DARLING HARBOUR PLUMBER

 

 

Pied Plumber

For over 25 years, The Pied Plumber has been a trusted local Darling Harbour name presenting an expansive range of plumbing services at affordable costs.

We understand that you expect promptly professional and courteous service from your local Darling Harbour plumber. Using the most recent plumbing technology to ensure that any plumbing problems are fixed effectively and efficiently.

 

Plumbing Companies Near Me?

 

Absolutely! We are on time and budget with no hidden expenses or lingering issues!! Simply contact us, and a Pied Plumber will be dispatched to your location in the nick of time.

At The Pied Plumber, we take pride in our service, and customer retention is of the greatest concern. Whatever the problem is, one of our knowledgeable local experts will help. Our Darling Harbour plumbers will unblock it, repair it or replace it.

 

FOLLOW THE LEADER IN SERVICE…

 

FOR ALL YOUR PLUMBING SERVICE NEEDS

 

 

Here are some common issues The Pied Plumber can help you with

 

 

 

Blocked Internal Darling Harbour Drains:

At some point, whether it's your children dropping off their toys or 'that' family member who shows up every Christmas and causes havoc.

Internal house blockages are typically caused by excessive grease in kitchen sinks and long-haired family members clogging shower drains and causing them to slow and, in some cases, overflow. The Pied Plumber has definitely had a fair share of expertise in each of these matters throughout the last 20 years. Unblocking floor drains adjacent to baths, resolving kitchen drainage issues quickly, repairing overflowing laundry tubs, and in some cases, removing dried cement from shower drains left by your previous tradesman. We take the time necessary to properly resolve your drainage issue by arming you with knowledge about prevention.

Let’s face it, drains aren’t necessarily pretty, and without experience unblocking that ensuite or main bathroom toilet, you can do more harm than good.

 

Constant Gas Smell in Darling Harbour:

We're fully licensed and insured experts in gas fitting in Darling Harbour. You might find a sudden smell of gas odour closest to your appliances; Such as areas around your gas heater, gas stove, BBQ, as well as a gas meter, or even if you begin to notice a faint egg odour under your floor or house-all of these are indications of a possible leak!

Gas leaks can be potentially dangerous for you and your family - you should call us to assess your next move. We have all the latest testing and tracing equipment at our disposal to ensure your kitchen and heating stay operational.

 

Shower Complications:  

At times, you may discover the dreaded concealed shower leakage through the nooks and crannies around water taps and showerheads. We carry thermal imaging equipment and can pressure test your shower outlet with ease. Examining the plumbing is unquestionably the prudent first step until paying out hundreds of dollars to reseal a bath or shower assembly just to discover the problem persists!

Additionally, we replace rusted shower heads with updated multi-function showerheads and instal personalised shower on-a-rail dispensers for those odd couples with significant height differences.

 

Leaking and Burst Darling Harbour Pipes:

Burst water pipes can occur anywhere on your property, usually near electric wires and other hidden locations, possibly resulting in extensive water damage and a hefty high water bill. We always have a 24-hour emergency plumber near Darling Harbour, and we will work to replace burst pipes, fix floods, and have you back to normal fast. Whether it’s a burst hose under a hand basin, a split copper pipe in the garden, to those dreaded breaks under the concrete or near the water meter – The Pied Plumber has more than certainly dealt with it! We'll get you back and starting again in no time.

 

Toilet trouble:

A leaking cistern can, in some cases, contribute to extensively high-water bills! You may even experience external toilet drips and leaks in and around the bowl or pan. If this is of concern, all toilets can be isolated below. We can even replace your old toilet with the one you've always wanted—you'd be amazed how much a modern toilet installation can transform the look of a bathroom.

Whether or not this is a crisis, we are always plumbing near Darling Harbour and would love to chat with you!

 

No Hot Water around your Darling Harbour Property:

Not having hot water at your house is a common plumbing problem in Darling Harbour – call the experts and fix it fast for your family!   While hot water leaks are relatively easy to repair, they should not be ignored as they can fail the hot water unit. In some cases, a faulty hot water tempering device may result in inadequate temperatures around essential wash down fixtures such as showers and sinks. We will service, repair, and install new hot water heaters. Our parts are solely sourced at your closest plumbing Reece supplier to ensure all hot water components within your property stands the test of time.

When your Boiler systems no longer heating at optimum temperatures, it is time to call in professionals to solve the issue as soon as possible. We do it with ease.

 

Blocked and Clogged External Drains:

On occasion, you may hear gurgling around drains, usually in kitchens, and even sewage floods outside, some more often than others. It is critical to address these issues as soon as they arise because routine plumbing issues can be resolved quickly!

A blocked outside sewer service is usually caused by tree roots desperate to survive infrequent Sydney draughts. Whether you're in Darling Harbour, Alexandria or Pyrmont - these mainline chokepoints are common in Sydney and the surrounding areas. Branch line obstructions, boundary trap or shaft matters are our specialty. The Pied Plumber uses state-of-the-art high-pressure jet blasting and CCTV inspection drain clearing equipment to clean, locate, and pinpoint the exact location of the problem, enabling your drainage wastewater system to be truly unblocked.

This also applies to stormwater drains that are unable to handle heavy runoff. Whether the downpipes are clogging in and around pits and you have overflowing strip drains, we’ll take the time to have you back in action in a jiffy, along with properly assessing your problem to prevent a recurrence.

 

Leaking Darling Harbour Taps:

Dripping taps will drive you and your loved ones insane! This popular plumbing issue includes everything from leaking kitchen or hand basin mixer tap cartridges to "that" bathroom shower that keeps the family awake at night. Broken and worn washers may lead to high quarterly water bills in all Sydney areas, which is why The Pied Plumber repair and/or fix your leaky taps, whether new or old, washer or quarter-turn – we do it all.

 

 

Need a Plumbing inspection?

 

For all after hours, public holiday and emergency service. The Pied Plumber will take care of it!

 

 

 

 

 

Pied Plumber's are experts in Darling Harbour who will provide you with repair, plumbing maintenance, and hot water installations. We are specialists in gas, storage, and electric hot water services.

 

 

No hot water in Darling Harbour? No Stress

NO CHEAP SHORT CUTS!

 

How can we help you?

For after hours emergency bookings, please call 1300 13 80 80

$50
CASHBACK
Pipe Coupon Icon
ON YOUR NEXT PLUMBING JOB
$150
OFF
Pipe Coupon Icon
HOT WATER REPLACEMENT
FREE
Pipe Coupon Icon
HOME PLUMBING HEALTH CHECK

** Terms and conditions apply

WHAT MAKES PIED PLUMBER
THE RIGHT CHOICE!

If you're looking for a family plumber in Darling Harbour who is dependable, competent, and knowledgeable, look no further than The Pied Plumber. We are committed to providing the highest quality workmanship and to performing jobs correctly the first time.

When only a professional family plumber suffices, call 1300 13 80 80 or complete our online enquiry form - We have outstanding local plumbing around Darling Harbour at fair rates.

The trusted name since 1995
Award winning service
On time, on budget
24/7 emergency service
Up-front & honest pricing
Service with a smile
Fixed in a jiffy
10% off for seniors & pensioners

 

Darling Harbour Drain Repairs:

 

Leaking/burst pipes and a broken or blocked drain can bring your household to a crashing halt, causing you to have problems to no end.   If your toilet, shower, bath, or sinks are flooded, blocked, or damaged, we treat all drain repairs as an emergency, and our plumbers in Darling Harbour will arrive promptly to unblock, Jet Blast, and clear your overflowing drain!

You can do the first thing if you have a blocked drain exacerbated by tree roots or paper to contact one of our specialists. Our after-hours plumbing service can help you understand the most frequent triggers of drain blockages. When our staff arrives, we will locate and remove the blockage while also ensuring that your drains are well designed to prevent unnecessary future blockages.

 

Emergency Darling Harbour Plumber:

 

We know plumbing issues don't only occur during the day, and more often than not, they happen after work, when you go for a shower or use the toilet.   The Pied Plumber understands this, and our team is made up of the best plumbers in Sydney to service our clients even at night. 24 hours a day, 7 days a week, that’s how dedicated our plumbing team is for you and your household. Therefore, the next time you encounter a plumbing problem in Darling Harbour, our direct response emergency team can assist you at any time of day or night.

 

What To do In an After-Hours Darling Harbour Plumbing Emergency:

 

Don’t panic; help is only a call away. Emergency crises are quite often evident; but, your wellbeing is not always apparent! Stop for a few seconds to recognise areas at risk of floods, look for electrical risks, and there's any water present around your storage hot water service - Switch off the electrical Boiler! Hot water should be labelled "HWS", "HOT WATER", or "HW" inside your electrical fuse box.

 

What do I do if a pipe in my toilet, kitchen, laundry, or ensuite bursts?

 

  • In most cases, respectfully demanding a delay would not address burst piping. Before our arrival, try to locate your water meter and, if possible; Determine if the leak is caused by cold or hot water to ascertain what to isolate. Otherwise, the water meter will exhaust all available supplies.

 

  • If you call from a residential property around Darling Harbour: Your water meter is almost certainly situated in the front (facing the street), usually in line with your house hose tap. Check that your meter tap is turned clockwise, then open an outside hose tap to confirm that your water utilities are indeed turned off. This will also allow the remaining house supply water line to drain safely elsewhere!

 

  • If your emergency stems from a unit block in Darling Harbour, the unit isolation valve is usually located under the kitchen sink or laundry tub. Regrettably, no fixed parameter exists for determining the final position of shared property isolation valves. As a result, The Pied Plumber strongly advises all unit owners to always be aware of the component's given position.

 

So, you've isolated your supplies and are about to call The Pied Plumber:

 

Although we have wet vacs and cleaning supplies, we believe this to be part of our emergency response. Having old towels on hand during an emergency is important and will certainly reduce the severity of damage inside your house. When a plumbing problem occurs under a hand basin, tub or sink, Chipboard cupboards and shelves can swell, resulting in irreversible damage. Whatever you do, never use hot air fans to relieve the situation, as this will escalate the damage before we arrive. Allow us to save your plumbing!

 

 

WHAT OUR LOCAL CUSTOMERS SAY ABOUT US

  • I could not be happier with your expertise and promptness in solving my problem. In future you will always be my plumber.
    Owen, St. Ives
  • I am very impressed by your excellent service and will be more than happy to recommend your company.
    Jane B, Redfern
  • I was very pleased with the advice and the work carried out for me. I am a very satisfied customer.
    Gwen, Kingsford
  • Sam did an excellent job. I am talking about the Pied Plumber non-stop!
    Viv, Cremorne

PLUMBING TROUBLESHOOTing

Short answer; check your cleaner packaging before use. Anything bleach-based, when used inside your cistern, can chemically deteriorate internal rubbers and valve parts. If your cistern cleaner is bright blue in particular - this voids most manufacture warranties of cistern components.

 

A quick tip from the boss: If you're one to use cleaners inside the toilet rim, look into dissolvable stick-on products rather than hanging manifolds. You'd be surprised how many call-outs Plumbers obtain from foreign objects caught down the dunny when flushed. Some can involve fairly significant works to retrieve.

 

Just remember - bleach for the pan, not your cistern!

 

We're always happy for a chat if you're experiencing any issues.

1300 13 80 80

At The Pied Plumber, we understand that knowing how to lower your water bills in Sydney will go a long way to helping families manage their budgets within challenging climates.

Never fear! There are ways that you can reduce your water bills, whether this be installing water-efficient appliances and fixtures or by ensuring that leaks are isolated and fixed promptly. These actions will not only help you save money on your water bills but assist in conserving water, we can all help save our dams during drought seasons.

 

Five strategies for saving money on your water bills in Sydney

  1. Check your toilet for leaks: Add a few drops of food colouring into the cistern and wait for 30 minutes. If the cistern is leaking into the pan, you will see the coloured water in the bowl.
  2. Install a dual flush cistern: This can save you up to 5 litres of water every time you flush the toilet, which can add up to thousands of litres per year.
  3. Check fixture flow rates: Our family plumbers will check the flow rates of your shower heads, bath, vanity, kitchen and laundry taps and install water restrictors, which reduce the flow rates to save you money.
  4. Repair leaking taps: One or more dripping taps can add up to a lot of wasted water and higher than expected bills. So whether these are indoors or outdoors, the prompt repair of leaking taps is essential to conserving water and saving money on your water bills in Sydney.
  5. Hidden underground leaks: Often, the first time you realise that you have an insidious underground water leak is when you receive an abnormally high water bill. However, leaks from underground mains water pipes can be challenging to locate, which is why our electronic line locating equipment comes in handy. Our family plumbers will quickly and efficiently find the source of your underground water leak and repair the pipes, helping you to save money on your water bills in Sydney.

Lower your water bills with a water leak claim form

When you have a concealed water leak underground and have promptly acted to fix the problem, you can claim credit for the additional water charges from the council. As licensed family plumbers in Sydney, we will issue you with a water leak claim form, which you submit to Sydney Water once we have repaired your water leak helping you lower your water bill in Sydney following a hidden leak.

 

We're here if you need us: 1300 13 80 80

Whatever the scenario. Whether this be servicing a tap, toilet or even in the event of a dreaded burst pipe - Try not to panic.

 

Firstly, what service do you wish to isolate?

 

If it's your hot water, you'll usually find a control valve with a black, green or blue handle at the lower end of the storage heater. Turn off clockwise to isolate.

 

If you require turning off the property at the meter or main control valve:

  • House owner: Usually, these will be street facing around the front fence boundary. If obstructed and unobtainable, try and source the front hose tap and focus your efforts to track in-line towards the road. Most meter's you'll find a T-shaped brass handle to turn clockwise for ÓFF'.
  • Unit owner: On occasion, such isolation taps can be difficult to source as there's no absolute clear-cut standard as to where they're required to be located. The most common areas are laundry tubs, kitchen sinks, standard corridor service doors, car parks and standalone wall valves. If unsure, call your strata and have them confirm its location.

 

Remember, your mains water isolation valve is the most critical tap around the property. ALL property owners should know their whereabouts.

All Australian plumbing fixtures must pass strict water efficiency guidelines established therein the Water efficiency and labelling scheme (WELS). Initially, this was introduced to provide consumers with detailed analysis on product flow rates, and to make easy, informed decisions before any purchase. Mainly this scheme ensures your product is approved for use in Australia.

In order to meet these conditions, products must first be produced in compliance with the AS/NZS 6400 standard and that the manufacturer must be licenced within the WELS structures. Simply Check their unique licence number located below the WELS rating or purchase from reputable Australian plumbing suppliers. Reece particularly is a safe supplier choice.

This is a fine example of why it's crucial to purchase Australian rather than inexpensive foreign knockoffs that can't be guaranteed. These products are not intended for our operating conditions, working pressures, or pipe sizing and can be potentially dangerous to you and your property.

Unsatisfactorily low water pressure may be reasonably simple to diagnose in certain situations.

Below is a check-list of possible triggers, from the more popular to the uncommon supplementary causes of low water pressure:

 

  • Your meter tap washer is broken and thus disallowing optimal flow through the meter assembly.
  • You have a pressure limiting or reduction device fitted to the meter outlet, which may require replacement.
  • Sydney Water has reduced the street pressure supply to prolong outdated and weakened mains pipes from breaking.
  • Your fixture tap outlets have become clogged with debris—this is a common problem, particularly after a split in a street main, causing fixture tap outlets to become blocked. This is a common problem, particularly after a break in a road main.
  • Your water supply lines are undersized for the number of fixtures you now have around your property. Particularly when homes have been renovated and fixture numbers have doubled without updating water supplies to accommodate the increased flow rates necessary to operate the dwelling
  • You have a below ground leak on the property; depending on the severity of the leak, this may impact your working pressures to fixtures.
  • You perhaps have a hidden pressure-reducing device fitted somewhere on the property. A full house inspection is often necessary to source these.

 

The key concern here is: Don't wait for your next water bill to arrive. Check that your water meter isn't ticking over constantly, and if concerned – we're a call away.

Fortunately, you're not alone—this prevalent problem in Sydney households is, most of the time, due to either hot water cylinder rust or cast-iron pipe supply issues. (if in older properties)
Open your taps independently to check whether the discolouration occurrence is on both hot and cold sides. If your issue is predominantly from the hot side - your hot water heater is asking for a check-up.


Are you finding this on both sides? It's a likely supply issue.


Discolouration can range from a slight cloudy white tinge to black, brown and orange water supplies. To check, simply fill a clear cup sample and focus notably on the bottom for sedimentation.
On occasion, even a Sydney Water street mains break can affect surrounding property supply, so in the meantime, continue using your plumbing and, after a day or two - if the problem persists, have this looked over.
Otherwise, give us a call! We would be more than happy to help. 1300 13 80 80

More than likely not. Most vitreous ceramic cisterns will have genuine and generic components available to rectify. If your Cistern's constructed in plastic and requires more than inlet and outlet rubber replacement to fix – you may find that a new plastic cistern is the most cost-effective route.

 

We always consider the age, make and model of your cistern and suite to ensure that you're given the know-how to make the correct decision.

Suppose your taps are a downright mission to operate, grinding and squealing or perhaps causing irritating hammering noises around the house. We aim to rectify this!

Our first approach is tap servicing; On occasion, taps can go from polar opposites within months. The key here is attending to the issue before it worsens, as inevitably, this will occur. To service your spindle taps, we always replace 'O' rings, clean and lubricate spindle threads, and install high-quality copper washers, along with assessing the seats where the washers are housed.

We also carry the most common parts to attend to mixer leaks and drips.

In some circumstances, when plumbing woes have been left unattended for too long – your taps may be irretrievably damaged, constituting a consideration to replace as the most cost-effective option.

On other occasions, it may come down to aesthetic purposes. You'd be surprised how most modern tapware can transform a plumbing area without having to fork out thousands to renovate.

 

These are all factors we provide you to ensure that you're across all options rather than just undertaking a bandaid solution.

  • Water hammering or odd audible noise emanating from plumbing fixtures can commonly cause burst pipes and property damage if left unattended. It may seem insignificant but certainly, a worthy idea to check for peace of mind.

 

  • Water damage outside shower screens, bubbling paint along walls and adjacent rooms, dampness or discolouration around ceilings along with off stagnant odour around plumbing areas. Avoid an insurance claim, have this checked.

 

  • Higher than usual water bills is a relatively standard method of establishing whether you have an issue. If you're unable to identify the cause of the billing discrepancy – It might be worth having your house inspected for leaks.

 

  • Gurgling and varying water levels in toilets, floor wastes, and outdoor drains are a giveaway sign that you have a sewer blockage. This is the time to have your plumbing assessed to prevent overflowing drains.

 

  • Hot water no longer producing a reasonable tempered supply; A plethora of causes may result in this scenario – All of which should be appropriately assessed by a licenced plumber.

 

  • The sudden drop in your outside garden grassed area? This might sound like a sinkhole or something out worldly, although it is usually a result of drainage breaks underground.

Broken sewer lines are the usual culprit as there's a regular supply of waste passing through these pipes, which can draw in the surrounding ground as waste matter passes. These issues should adequately be assessed even if your grass has never been greener!

 

Since our establishment in 1995 – You've had it, we've seen it.

Rest assured that anyone sent to your premises is covered under the Pied Plumber business plumbing licence. You will never have a subcontractor attend as all staff are employees. Our squeaky clean record can easily be viewed by searching us on the fair trading NSW website.

 

We are additionally insured with 20 million public liability cover.

 

Here at The Pied Plumber - We love resolving your issues. Some seemingly more urgent than others.

We'll arrive for a leaking tap and then get that question on the way out:

"OHHH, while you're here. We have this bathroom which we barely use that smells!"

While you may have underlying plumbing issues in these cases, the most common here is that all your plumbing around the property will require regular use.

In areas where (for example) an ensuite bathroom is used every six months - what occurs here is that the water levels in the traps around the sinks and floors wastes slowly drop as they evaporate, leading to water seal loss. Odour can then travel into the bathroom from the sewer service.

 

There is an easy fix!

 

Make sure you run water services in the room at least every few weeks whilst ensuring that water always reaches the floor wastes. You may otherwise be a victim of poor plumbing design where these floor wastes may require a manual top-up.

Ensure the room is well ventilated, and if the problem persists, we're a call away!

 

We know design! Call the experts if you're still stuck!

1300 13 80 80

For the most part – It's not a secret language.

 

This refers to sets of rules outlined by countries, states and regions worldwide with the objective of providing safe method, practice and installation of plumbing materials and systems fit for public health and safety.

We operate within the guidelines of the Australian Sydney region, which is primarily governed by the AS/NZ 3500 standard and NSW code of practice.

 

So if you overhear a plumber saying, "That’s not to standard!” – It’s probably good news that he or she knows the rules which must be carried out.

In this case – size does matter.

 

The pipe sizing of your original house before renovations and additions may be of minimum size. Suddenly you’ve doubled your required flow rates and experiencing pressure losses in either/or water and gas supplies.

This may be a result of incorrectly designed plumbing systems. Whether it’s upgrading a gas meter regulator or assessing your pipe size after your water meter through to fixtures – The Pied Plumber can evaluate your concern by providing clear options to assist.

Severe leaks can cause hundreds of litres of water per day to gurgle down your drain. Water use in Sydney averages per person at around 300L per day, factoring in all dishwasher, washing machine, toilet, shower, hosing and general tapware use. So losing a vast amount through a seemingly minor problem can add up fairly quickly. If left for months, it’ll affect your back pocket the next time you receive your water bill.

Our advice is to fix significant leaks as soon as they arise.

Generally speaking, from stone-cold to piping hot – this process, whether gas or electric, should not exceed 30-40 minutes.

There are some exceptions here:

Is your electric hot water service powered by an off-peak setting? In this case, you’ll more than likely be waiting until the following morning to have a shower as off-peak settings are usually operational after 2 am to power your unit to its optimal temperature range.

So, your Hot Water Service is a Gas storage model? Most gas storage models actually heat quicker than electric variants. If you’re still running cold water after 30 minutes, you should probably have the setup looked at.

Heaters can be marvellously temperamental, and often times if it isn’t a power or gas issue, it can be valve related. The Pied Plumber can assist either way!

 

You absolutely can! Whether day or night, after hours or public holidays. The Pied Plumber has you and your family covered. We pride ourselves in assisting in times of need and understand that not all plumbing problems occur nine to five.

Well, if cheaper running costs, longer hot water service lifespan, greater warranty periods and fewer working valves to disrupt your hot water is of interest, then instantaneous options are for you.

It is important to keep in mind that instantaneous hot water technologies are typically more costly to install than conventional hot water systems since a weatherproof electrical PowerPoint is a factor in any outlay costs. However, once all infrastructure is in place, these installations save thousands of dollars throughout their life cycle through efficiencies and often last twice as long as electric storage units.

We suggest natural gas versions only since LPG systems are relatively energy-intensive, requiring considerably more bottle swaps throughout a year cycle.

Absolutely! This can, on request, be conducted free of charge during any paid visit. A plumbing report to be issued as part of the service. including:

  • flow rate testing
  • Checking all indoor taps and toilets for leaks
  • Checking outdoor taps for leaks
  • Assessing the condition of your hot water service, including operating temperatures
  • House pressure testing

That’s because it’s a whole lot cheaper to run! Electricity has never been more expensive, and on average, an electric Hot Water service can account for a third of your total power bill. Running your Hot Water service at the cheapest tariff at night is approx. 60% less per kilowatt hour.

 

But, it’s not all sunshine lolly-pops

 

Your electricity utility will require installing a new off-peak timer switch on your meter board which is not always possible. Additionally, your hot water heater must be a minimum storage of 250 Litres and sized accordingly so as to ideally remain hot throughout the day and night. Undersized setups can easily run out of hot water until the following day and may not cope should additional household members be present.

‘Off-peak setting 2’ is a potential game-changer in this scenario. This is a setting used at the meter board to enable power back to the heater one further occasion during the day, allowing the setup to cope with supplementary visitors craving for their showers.

Suppose Off-Peak isn’t ideal for you? Perhaps consider gas hot water solutions (if possible) or stainless steel storage cylinder routes which will reduce your running costs and environmental footprint.

This flimsy piece of paper is documentation usually found with your house sale contracts, which can significantly assist in locating the position of below-ground sewer pipework. In essence, it’s a vague outline of your outdoor sewer service and, in most cases outdated, however, it does have relevance during scenarios where a Plumber is unable to locate essential final sewer points, as oftentimes these are buried underground in older dwellings. It also gives further knowledge on the whereabouts of mains infrastructure. 

 

It is always a good idea to have this document on hand ready before a plumber arrives. If unobtainable, visit the Sydney Water website and purchase a downloadable copy.

The maximum and most ideal house pressure range is 500KPA.

 

This is achieved throughout most of Sydney; however, some areas have been known to exceed this immensely. Furthermore, in these particular locations, we’ll often find problem issues that rarely occur elsewhere.

High-pressure notably reduces lifespan and increases wear in pipes and valves. Water hammering concerns are prevalent in these scenarios, and generally, water use in high-pressure homes is far greater than their optimal pressure counterparts.

Unfortunately, Sydney Water does not guarantee a maximum supply pressure, leaving the sole discretion of the consumer to protect their property. As plumbers, we can easily perform a pressure test and, if necessary, install a water meter pressure-limiting device to safeguard your home.

  • Take notice of high-efficiency WELS rated Australian fixture products

 

  • Ensure you’re using water restriction devices on all tapware. (saving up to 5L per minute)

 

  • Choose water-efficient electric appliances with a minimum of 4 WELS rating (saving up to 50L per wash)

 

  • Pre-fill kitchen sinks for rinsing rather than leaving your tapware on. (saving up to 9L per minute)

 

  • Ensure you wash full loads worth of clothes rather than washing the one sock that dog buried in the backyard.

 

  • Turn the basin tap off during your two-minute teeth brushing exercise. (could save 4-6L of water before you head off to work!)

SERVICE AREAS

Local to you

WE’RE READY TO RESOLVE YOUR PLUMBING ISSUE