Everhot Hot Water Systems - Plumbing Sydney Wide
The Pied Plumber provides professional and expert repairs, services and the installation of Everhot hot water systems in Sydney. Everhot hot water systems are a popular choice for many Sydney home owners who want a reliable and long lasting hot water system.
Everhot is owned by the same Japanese company that owns Rheem, so these systems can be easily interchanged and you can replace a Rheem with an Everhot hot water system without difficulty. The Everhot range of hot water systems includes both electric and gas storage systems, as well as continuous flow gas hot water and heat pumps.
Everhot electric hot water heaters
The Everhot electric hot water systems are available in a range of sizes from a compact 25L to a large 400L tank. Some of the Everhot electric storage tanks are available with twin or even triple heating elements and some models are also available in stainless steel instead of vitreous enamel. (the normal material used for constructing hot water storage tanks)
(Full model guide: 25L, 50L, 80L, 125L, 160L, 250L, 315L to 400L)
Everhot gas storage hot water systems in Sydney
For home owners that prefer a gas system, the Everhot gas storage hot water systems are available in a range of sizes with either 3 star or 5 star energy ratings. The Everhot 270 has one of the highest energy ratings for gas storage hot water systems and is not only environmentally friendly but will also help you to cut down on your energy bills
Need a Plumbing inspection?
If you're searching for a dependable, professional, and intelligent family plumber in Sydney, look no further than The Pied Plumber. We are dedicated to doing the best workmanship possible and to doing jobs properly the first time.
When only a professional family plumber suffices, call 1300 13 80 80 or complete our online enquiry form - We have outstanding local plumbing around Sydney at fair rates.
Everhot continuous flow instantaneous gas hot water systems
Everhot continuous flow gas hot water heaters are available in 20L and 26L/minute flow rates and are highly energy efficient. The Everhot 20 and the Everhot 26 both have a 5 star energy rating and are a great option when space is limited and you prefer gas to electric systems. With the Everhot gas continuous flow hot water units you will never run out of hot water and you only pay for the water you use.
For the installation, repair and servicing of Everhot hot water systems in Sydney, call the local family plumbers at The Pied Plumber on 1300 13 80 80 or complete our online enquiry form.
Find out more: https://www.reece.com.au/
** Terms and conditions apply
WHAT MAKES PIED PLUMBER
THE RIGHT CHOICE!
The Pied Plumber is an award winning and family owned business providing affordable family plumbing for residential properties and small commercial businesses across Sydney.
With more than 20 years in the business and a solid focus on offering our customers value for money and excellent customer service, we have built a strong reputation for our honesty, integrity and our high standards.
WHAT OUR LOCAL CUSTOMERS SAY ABOUT US
I could not be happier with your expertise and promptness in solving my problem. In future you will always be my plumber.
I am very impressed by your excellent service and will be more than happy to recommend your company.
I was very pleased with the advice and the work carried out for me. I am a very satisfied customer.
Sam did an excellent job. I am talking about the Pied Plumber non-stop!
Why is the water pressure in my house so low?
Unsatisfactorily low water pressure may be reasonably simple to diagnose in certain situations.
Below is a check-list of possible triggers, from the more popular to the uncommon supplementary causes of low water pressure:
- Your meter tap washer is broken and thus disallowing optimal flow through the meter assembly.
- You have a pressure limiting or reduction device fitted to the meter outlet, which may require replacement.
- Sydney Water has reduced the street pressure supply to prolong outdated and weakened mains pipes from breaking.
- Your fixture tap outlets have become clogged with debris—this is a common problem, particularly after a split in a street main, causing fixture tap outlets to become blocked. This is a common problem, particularly after a break in a road main.
- Your water supply lines are undersized for the number of fixtures you now have around your property. Particularly when homes have been renovated and fixture numbers have doubled without updating water supplies to accommodate the increased flow rates necessary to operate the dwelling
- You have a below ground leak on the property; depending on the severity of the leak, this may impact your working pressures to fixtures.
- You perhaps have a hidden pressure-reducing device fitted somewhere on the property. A full house inspection is often necessary to source these.
The key concern here is: Don't wait for your next water bill to arrive. Check that your water meter isn't ticking over constantly, and if concerned – we're a call away.
How Long Should it Take for my Storage Heater to Warm Up?
Generally speaking, from stone-cold to piping hot – this process, whether gas or electric, should not exceed 30-40 minutes.
There are some exceptions here:
Is your electric hot water service powered by an off-peak setting? In this case, you’ll more than likely be waiting until the following morning to have a shower as off-peak settings are usually operational after 2 am to power your unit to its optimal temperature range.
So, your Hot Water Service is a Gas storage model? Most gas storage models actually heat quicker than electric variants. If you’re still running cold water after 30 minutes, you should probably have the setup looked at.
Heaters can be marvellously temperamental, and often times if it isn’t a power or gas issue, it can be valve related. The Pied Plumber can assist either way!
Does pipe size matter?
In this case – size does matter.
The pipe sizing of your original house before renovations and additions may be of minimum size. Suddenly you’ve doubled your required flow rates and experiencing pressure losses in either/or water and gas supplies.
This may be a result of incorrectly designed plumbing systems. Whether it’s upgrading a gas meter regulator or assessing your pipe size after your water meter through to fixtures – The Pied Plumber can evaluate your concern by providing clear options to assist.
What is "Plumbing Code"?
For the most part – It's not a secret language.
This refers to sets of rules outlined by countries, states and regions worldwide with the objective of providing safe method, practice and installation of plumbing materials and systems fit for public health and safety.
We operate within the guidelines of the Australian Sydney region, which is primarily governed by the AS/NZ 3500 standard and NSW code of practice.
So if you overhear a plumber saying, "That’s not to standard!” – It’s probably good news that he or she knows the rules which must be carried out.
Do We Surcharge On Credit Card Transactions?
Take it from the owner of the Pied Plumber—a pet hate of agreeing to a price and then the hidden surprise afterwards.
Since 1995 – We have never surcharged a VISA or MASTERCARD expense back to our customers. We will, however, continue to charge 1.5% on AMEX.
How can I possibly reduce water use inside the house?
- Take notice of high-efficiency WELS rated Australian fixture products
- Ensure you’re using water restriction devices on all tapware. (saving up to 5L per minute)
- Choose water-efficient electric appliances with a minimum of 4 WELS rating (saving up to 50L per wash)
- Pre-fill kitchen sinks for rinsing rather than leaving your tapware on. (saving up to 9L per minute)
- Ensure you wash full loads worth of clothes rather than washing the one sock that dog buried in the backyard.
- Turn the basin tap off during your two-minute teeth brushing exercise. (could save 4-6L of water before you head off to work!)
Why is my water coloured?
Fortunately, you're not alone—this prevalent problem in Sydney households is, most of the time, due to either hot water cylinder rust or cast-iron pipe supply issues. (if in older properties)
Open your taps independently to check whether the discolouration occurrence is on both hot and cold sides. If your issue is predominantly from the hot side - your hot water heater is asking for a check-up.
Are you finding this on both sides? It's a likely supply issue.
Discolouration can range from a slight cloudy white tinge to black, brown and orange water supplies. To check, simply fill a clear cup sample and focus notably on the bottom for sedimentation.
On occasion, even a Sydney Water street mains break can affect surrounding property supply, so in the meantime, continue using your plumbing and, after a day or two - if the problem persists, have this looked over.
Otherwise, give us a call! We would be more than happy to help. 1300 13 80 80
When Should I contemplate installing a tankless instantaneous Hot Water Service?
Well, if cheaper running costs, longer hot water service lifespan, greater warranty periods and fewer working valves to disrupt your hot water is of interest, then instantaneous options are for you.
It is important to keep in mind that instantaneous hot water technologies are typically more costly to install than conventional hot water systems since a weatherproof electrical PowerPoint is a factor in any outlay costs. However, once all infrastructure is in place, these installations save thousands of dollars throughout their life cycle through efficiencies and often last twice as long as electric storage units.
We suggest natural gas versions only since LPG systems are relatively energy-intensive, requiring considerably more bottle swaps throughout a year cycle.
Can I Have a Pied Plumber Help After-Hours?
You absolutely can! Whether day or night, after hours or public holidays. The Pied Plumber has you and your family covered. We pride ourselves in assisting in times of need and understand that not all plumbing problems occur nine to five.
What Hot Water Brand Should I Consider?
For the hottest of hot, hot water you’ve ever seen, Rheem comes on steady, hot and strong. It just keeps going on...
It comes down to glorious advertising. However, (and sorry to burst anyone's bubble) – in this day and age, there’s no clear winner in the hot water brand race.
Many heaters are rebranded with matching warranties and technology and often times built in factories situated side by side.
We only recommend purchasing Heaters from Reece to ensure fast and reliable after-sales service and, above all else, suggest sticking to the top brands and not these knock offs found that your local hardware store.
Do You Offer Home Plumbing Health Checks?
Absolutely! This can, on request, be conducted free of charge during any paid visit. A plumbing report to be issued as part of the service. including:
- flow rate testing
- Checking all indoor taps and toilets for leaks
- Checking outdoor taps for leaks
- Assessing the condition of your hot water service, including operating temperatures
- House pressure testing
My shower takes a lifetime to heat up! WHY?
A shower, in this case, is just an example. In theory, any hot water fixture can be affected by this problem. You may have hot water quickly on one side of the house and then worry it's broken once you reach the other end.
These issues are mainly pipe sizing and length related problems. The further your heater is away from the fixture, the greater the heat loss and time taken to reach the furthermost tap. Even climate can affect the heat loss in lines.
Only when Hot water services have a lack of pressure preventing optimal flow is when these issues are insanely prevalent. Most of the time, we are able to provide solutions to improve or completely remedy your hot water problem.
What Are Your Business Hours?
Our regular business hours are Monday through to Friday, 7am – 3pm. This excludes Public holidays and long weekends. However, we understand that not all plumbing issues arise between these times. If urgent, we offer after-hours, same day service if necessary.
The Pied plumber is always happy to help!
Why Does My Neighbour Have An Off-Peak Electric Hot Water Service?
That’s because it’s a whole lot cheaper to run! Electricity has never been more expensive, and on average, an electric Hot Water service can account for a third of your total power bill. Running your Hot Water service at the cheapest tariff at night is approx. 60% less per kilowatt hour.
But, it’s not all sunshine lolly-pops
Your electricity utility will require installing a new off-peak timer switch on your meter board which is not always possible. Additionally, your hot water heater must be a minimum storage of 250 Litres and sized accordingly so as to ideally remain hot throughout the day and night. Undersized setups can easily run out of hot water until the following day and may not cope should additional household members be present.
‘Off-peak setting 2’ is a potential game-changer in this scenario. This is a setting used at the meter board to enable power back to the heater one further occasion during the day, allowing the setup to cope with supplementary visitors craving for their showers.
Suppose Off-Peak isn’t ideal for you? Perhaps consider gas hot water solutions (if possible) or stainless steel storage cylinder routes which will reduce your running costs and environmental footprint.
Is The Pied Plumber A Franchise?
We’re proud to advise – NO!
The Pied Plumber is a family-owned business. Furthermore, that’s just the way we like it!
Why is it essential to have optimal water pressure?
The maximum and most ideal house pressure range is 500KPA.
This is achieved throughout most of Sydney; however, some areas have been known to exceed this immensely. Furthermore, in these particular locations, we’ll often find problem issues that rarely occur elsewhere.
High-pressure notably reduces lifespan and increases wear in pipes and valves. Water hammering concerns are prevalent in these scenarios, and generally, water use in high-pressure homes is far greater than their optimal pressure counterparts.
Unfortunately, Sydney Water does not guarantee a maximum supply pressure, leaving the sole discretion of the consumer to protect their property. As plumbers, we can easily perform a pressure test and, if necessary, install a water meter pressure-limiting device to safeguard your home.
Where you'll find us
Local to you
- Elanora Heights
- Mona Vale
- Church Point
- Allambie Heights
- Frenches Forest
- Curl Curl
- Terrey Hills
- Killarney Heights
- Beacon Hill
- Dee Why
- Palm Beach
- Wheeler Heights
- Avalon Beach
- Balgowlah Heights
- Collaroy Plateau
- Cromer Heights
- Duffys Forest
- North Narrabeen
- Oxford Falls
- Northern Beaches
- St Ives
- Middle Cove
- Macquarie Park
- North Turramurra
- North Wahroonga
- West Killara
- West Pymble
- Upper North Shore
- Lane Cove
- Hunters Hill
- North Sydney
- Neutral Bay
- Lavender Bay
- Milsons Point
- Huntleys Point
- St Leonards
- Clifton Gardens
- Kurraba Point
- Linley Point
- Cremorne Point
- Crows Nest
- Lane Cove North
- Lane Cove West
- Lower North Shore
- Castle Cove
- Centennial Park
- Rushcutters Bay
- Watsons Bay
- Potts Point
- Elizabeth Bay
- Bellevue Hill
- Dover Heights
- Double Bay
- Point Piper
- Eastern Suburbs
- Baulkham Hills
- Bella Vista
- Castle Hill
- West Pennant Hills
- North Rocks
- Stanhope Gardens
- Rouse Hill
- South Wentworthville
- Kings Langley
- The Ponds
- Winston Hills
- Box Hill
- Pennant Hills
- The Hills District
- Dulwich Hill
- Hurlstone Park
- Summer Hill
- Rodd Point
- Canada Bay
- Russell Lea
- Bardwell Park
- Bardwell Valley
- Clempton Park
- Wolli Creek
- Arndell Park
- Inner West
- Kings Cross
- The Rocks
- Surry Hills
- Darling Harbour
- Forest Lodge
- Darling Point
- Dawes Point
- Moore Park
- Sydney CBD
- Pendle Hill
- Seven Hills
- North Parramatta
- Breakfast Point
- Constitution Hill
- Denistone West
- Denistone East
- Dundas Valley
- East Ryde
- Harris Park
- Kings Park
- Mays Hill
- Melrose Park
- Mobbs Hill
- Tennyson Point
- Wentworth Point
- West Ryde
- Western Sydney
- Liberty Grove